Protection without Wi-Fi. Peace of mind without monthly fees. Shop AIWSH

THE AIWSH COLLECTION

Build your protection.

Start with a complete system.
Expand to the spaces that need it.

1 / 3

THE AIWSH FILM

See the idea in action.

LONG-RANGE LORA TECHNOLOGY

Long range.
Closer protection.

Full aerial garden scene with a main house and a smaller detached building

A direct wireless link across rooms, floors and detached spaces. No Wi-Fi needed.

UP TO1,640 ft500 m in open areas
AIWSH shut-off valve
MAIN HOUSEShut-off valve
AIWSH wireless leak sensor
DETACHED SPACELeak sensor

Open-area range. Walls, floors and interference may reduce range. Test in place. Scene and signals are illustrative.

PROTECTION, ROOM BY ROOM

Find the right spot.

Choose a room to see where its sensor belongs.

Cutaway house showing an upstairs bathroom, main-floor kitchen, basement laundry and water heater area
AIWSH valve and leak sensor installed under a kitchen sink

EXPLORE YOUR SETUP

Kitchen

Place a sensor below sink supply connections or beside the dishwasher.

Build your protection

REAL INSTALLATIONS

Installed in real spaces.

A closer look at AIWSH, beyond the product photos.

Plan your installation
AIWSH installation within a wooden plumbing cabinet
01

Inside the cabinet

AIWSH valve installed alongside filtration equipment and pipework
02

Pipework & filtration

AIWSH valve connected to copper pipework
03

Pipe connection detail

Installed AIWSH valve connected to its wired leak probe
04

Valve & wired probe

AIWSH valve fitted vertically with power and probe connections
05

Vertical pipework

AIWSH wireless leak sensor in a bowl during a sensor test
06

Sensor test setup

Everyday protection.
Practical details.

Features for daily use. Conditions to check before buying.

What you get

Auto shut-offCloses the water supply when a sensor detects a leak.
Up to 8 sensorsPair up to 8 wireless sensors with one valve.
Battery backupKeeps protection working during power interruptions.
Valve exerciseAutomatically cycles every 15 days.
Manual controlOpen or close with the button or knob.
Two sensor modesChoose a mode for dry or wet rooms.

Good to know

No phone alertsAn audible alarm at home; no remote notifications.
Cold water onlyOperating range: 33.8–122°F.
Indoor use onlyAvoid sunlight, fuels and chemicals.
Plumber required1″ MNPT connection; 3/4″ adapter included.

YOUR SYSTEM, YOUR SETUP

AIWSH shut-off valveAIWSH wireless leak sensorSecond AIWSH wireless leak sensor included in the kit

AIWSH / AWS-Q20 Pro

Complete Home Protection Kit

Choose the extra sensors your home needs.

$199one-time, no subscription

Add wireless sensors
$49 each · up to 6 extra sensors
0
SENSOR DEAL
2 sensors 5% off3+ sensors 10% off

U.S. shipping · 3–5 days · 30-day returns

Shipping & returns
Ships from the U.S.Estimated delivery: 3–5 days
Free shipping on orders $300+Below $300, shipping is confirmed before payment.
30-day returnsBuyer pays return shipping.
Shipping & return details
Product details

What’s included

  • Smart shut-off valve (AWS-Q20 Pro)×1
  • Wireless leak sensor, LoRa, IP67×2
  • Wired leak probe with 3.3 ft cable×1
  • Adapters, union nuts, gaskets, batteries, USB-C cableincluded

AIWSH FOR BUSINESS

More homes.
One reliable partner.

For plumbing professionals, distributors and property managers. Explore partnerships and protection for your next project.

Explore business partnerships
A plumbing professional and property manager reviewing a residential project
A couple relaxing in a warm, sunlit home

PEACE OF MIND, EVERY DAY

A little preparation.
A lot of peace of mind.

Make room for everyday life. Let AIWSH help protect your home.

View kit

ANSWERS, MADE SIMPLE

Common questions

What happens if a sensor gets wet?

The paired sensor triggers an alarm and sends a close signal to the valve. Water must reach a sensor; sensors do not detect every concealed pipe leak.

How do I check that my sensors are working?

Follow the current model manual to test each paired sensor and confirm the valve responds. Recheck placement and operation after moving a sensor.

How do I restore water after a leak?

Fix the leak, then dry the sensor and surrounding area. Follow your model’s instructions to reopen the valve. Contact support if the alarm returns.

Where should I place the wired probe?

Place the sensing end where water would collect, within cable reach of the valve’s dedicated sensor port. Keep the connection dry and follow the model manual.

What should I send for installation advice?

Email your valve model, pipe size and thread type, country, and a clear photo of the proposed connection to official@aiwsh.com. Ask for the current manual and fitting details.

Home/AIWSH for Business

AIWSH FOR BUSINESS

Water protection.
Built around
your business.

OEM, private label and wholesale solutions for brands, importers and professional partners.

Start your projectExplore customization
AIWSH shut-off valve and leak sensor installed beneath a kitchen sink
From your product brief to everyday protection.

YOUR BRAND. YOUR REQUIREMENTS.

Make it
your own.

OEM and private-label options for your market.

AIWSH AWS-Q20 Pro shut-off valve base product
AWS-Q20 Pro Product platform

Brand & packaging

Logo, labels, packaging and manuals.

Product configuration

Valve interfaces, sensors and probe lengths.

Bulk & export

Samples, order quantities and destination.

Customization requirements

Customization feasibility, minimum order quantities, sample costs and production lead times are confirmed for each project.

Discuss your customization

BETTER TOGETHER

A partnership
that fits.

Insurance companies

Water-loss prevention pilots and product evaluation.

Discuss a pilot

Plumbers & installers

Trade enquiries, installation fit and sample requests.

Trade enquiry

Property teams

Sensor placement and pilots for managed homes.

Plan a project

COMMERCIAL ORDERS

Clear terms.
A considered start.

Business pricing is quoted for your quantities and requirements.

DISPATCHChina
ESTIMATED DELIVERY15–30 days
FREE SHIPPING$300+

30-day returns · Buyer pays return shipping.

Shipping & order details

For orders below $300, shipping is confirmed before payment. Delivery times are estimates. Contact official@aiwsh.com before returning an order within 30 days of delivery.

Samples, minimum quantities and pricing are confirmed by quotation. Distribution territories, channel rights and exclusivity require written agreement. Customization is subject to feasibility and production lead-time review.

Read shipping & returns

LET’S BUILD YOUR NEXT PROJECT

Start with
a conversation.

A brand brief, a bulk order or a pilot program. Tell us what you have in mind.

official@aiwsh.com
Useful to include

Your target market, quantity, specifications and delivery needs.

How your enquiry is sent

Review the form, then send it from your email app. If no app opens, copy or download the enquiry and email official@aiwsh.com. The page cannot confirm email delivery.

Additional project details Optional

Review first, then send from your email app. No payment or order is placed.

Details stay in this page until you choose an export or email action. They are not saved after you close or reload this page. Online submission, when available, sends them to the receiving service. Privacy details

Technical resources & documents

Product summary

Download the displayed kit contents and specification table as a text reference for your project.

Installation overview

Review placement, power and the installation sequence already provided on this page.

View installation

Document request

Request the current manual, dimensional drawing, interface details or available compliance documents for your exact model and market.

Request documents

The downloadable summary reflects this webpage; it is not an installation manual or certificate. Model-specific documents are supplied on request.

Home / Support

INSTALLATION & SUPPORT

A little guidance.
A confident setup.

From your first fitting check to everyday care. Find practical help for your AIWSH system.

START HERE

Before the water goes back on.

01

Confirm the fit

Check your pipe size, thread type and valve model. Send us a connection photo if you need help.

Check compatibility →
02

Install with a plumber

Use the exact model manual and suitable fittings. Keep the valve and its power connections dry.

Installation overview →
03

Pair. Place. Test.

Test each sensor with the valve, then verify communication again in its final position.

See testing guidance →

Your model. The right instructions.

Request the current manual, fitting dimensions or a product demonstration for your exact system.

Installation at a glance

The valve goes on your main cold water line, horizontal or vertical, between the main inlet valve and your branch lines.

Plumber required. Use a qualified plumber for installation. The wired probe plugs into the sensor port on the valve.

Model reference specifications

Reference values from the supplied product page. Ask for the current model datasheet to confirm operating limits, dimensions, threads and included adapters before installation.

Working pressure45–145 PSI
Connections1" MNPT, 3/4" FNPT and 3/4" MNPT
Water typeMunicipal tap water
Valve power5V/1A DC adapter (100–240 VAC), rechargeable lithium backup
Valve temperature range33.8–122°F
Sensor power2 × AAA
Sensor size3.17 × 1.15 in
Sensor ratingIP67, 41–131°F
WirelessLoRa, up to 8 sensors per valve
  1. 1Shut off main water
  2. 2Cut and prepare pipe
  3. 3Fit the valve
  4. 4Charge and power on
  5. 5Pair the sensors
  6. 6Restore water slowly
Before work begins

Have a qualified plumber review the current model manual, valve markings, local installation requirements and all fittings. Do not rely on this overview as an installation manual. Request the exact pairing and reset instructions for your model.

PRACTICAL ANSWERS

Find your next step.

Where should the valve be installed?

Have a qualified plumber install it on a compatible main cold-water line, after the main inlet shut-off and before branch lines. Confirm the exact model, fittings and operating limits before work begins.

Where should I put the sensors?

Place sensors on a flat surface where leaking water is likely to collect: near supply connections under sinks, beside a washing machine or near a water heater. Avoid routine splashes. Keep detection contacts unobstructed.

How do I pair a wireless sensor?

Use the pairing sequence in the manual for your exact valve and sensor model. After pairing, perform a controlled water-contact test and confirm the valve closes. If the sensor does not communicate, send support a photo of both model labels.

How do I test leak protection?

Arrange the test when a temporary interruption of water is acceptable. Keep the valve and power connections dry. Touch only the sensor detection contacts to a small amount of water, check the alarm and confirm the valve closes. Dry the sensor before restoring service.

How do I restore the water supply?

First find and fix the leak, dry all triggered sensors and make sure the area is safe. Use the valve’s open control according to your model manual. Confirm normal supply and inspect the installation for leaks. Do not repeatedly reopen an unresolved leak.

The sensor sounds but the valve does not close.

Check valve power, sensor batteries and pairing. Test with the sensor closer to the valve, then test again in its intended location. If the valve still does not close, contact support with panel-light photos and a short video.

The valve has closed unexpectedly.

Check every paired sensor and the wired probe for water, condensation or routine splashes. Identify the cause, dry the contacts and correct any leak before restoring water. Send the panel-light status to support if the cause is unclear.

How do I reset or replace a sensor?

Contact support with your valve and sensor model before resetting. Reset and pairing sequences can differ by model; a reset may require sensors to be paired again. After replacement or reset, test the complete system.

Can I add more sensors or a longer wired probe?

A compatible valve supports up to 8 wireless sensors in total. The kit includes 2, leaving room for up to 6 more on one valve. Match the wired probe connector and cable length to your valve before ordering.

What should I include in a support request?

Include your order reference, valve model, installation location, the panel-light status and what happened. Add clear installation photos or a short video to your email. Never include payment card information.

WE’RE HERE TO HELP

Tell us about
your setup.

Share the details below to prepare an email to our support team. Attach installation photos or a short video in your email app.

official@aiwsh.com

CHOOSE WITH CONFIDENCE

Is AIWSH right for you?

A good fit when you want…

  • Automatic shut-off triggered by water touching a paired sensor.
  • Local protection without setting up home Wi-Fi or an app account.
  • Wired and wireless sensors for specific high-risk areas.
  • Independent protection for each installed home or unit.

Check these requirements first

  • This model has no phone alerts, remote control, central dashboard or water-use tracking.
  • Sensors detect water at their location; they do not detect every concealed pipe leak.
  • Pipe threads, adapters, pressure, power and indoor location need to match the model.
  • Qualified installation and regular sensor checks are needed.
Need help confirming compatibility? Contact support

AIWSH / CUSTOMER INFORMATION

Shipping, returns & support

For the current email-order service, request a written quotation before payment. Online checkout is available only when a verified purchase link is shown for the selected product.

Delivery information

Retail orders ship from the United States, with estimated delivery in 3–5 days. Business orders ship from China, with estimated delivery in 15–30 days. These are estimates, not guaranteed delivery dates.

Shipping charges

Orders of $300 or more qualify for free shipping. For orders below $300, shipping charges are confirmed before payment. Provide your delivery address when requesting a quotation.

Returns and replacements

Returns are accepted within 30 days of delivery. The buyer pays return shipping. Email official@aiwsh.com with your order reference and return request to obtain the return address before sending the product back.

Product support

For a fault, provide the model, order reference, photos or video and troubleshooting already attempted. Warranty duration, coverage and exclusions must be confirmed in the order documentation; this page does not establish a new warranty commitment.

AIWSH / CUSTOMER INFORMATION

Privacy & local storage

This page explains how this standalone website currently handles information. Contact official@aiwsh.com with privacy questions.

Forms and email

Inquiry fields stay in the open page until you choose to send or export them. Email actions open your email app; your email provider handles that message. Downloads create a local text file. Copy actions copy the displayed inquiry to your clipboard. Inquiry fields are not restored by this page after reload.

Optional online submission

When a direct submission button is available, it sends the entered inquiry fields to the configured AIWSH receiving service over HTTPS. The page reports success only after that service acknowledges receipt. If submission fails, use the email or download option. This page does not independently send an acknowledgment email.

Shopping bag

The website uses browser local storage to remember the selected kit, its options and separately added accessory quantities. It does not store inquiry contact details in that bag record. Use “Remove kit” to clear the saved configuration.

External services

The website requests fonts from Google Fonts, which may receive normal network information such as IP address. The brand-film player embeds YouTube using its privacy-enhanced domain. Loading or playing it may share network information with YouTube; playback is subject to that service’s policies. If you follow an external checkout or document link, the destination service handles that interaction under its own terms.

Information requests

For access, correction or deletion questions relating to information you emailed or submitted to AIWSH, contact official@aiwsh.com and identify the relevant inquiry. Do not include sensitive identification or payment data unless a secure process is arranged.

AIWSH / CUSTOMER INFORMATION

Website & ordering terms

This website provides product information and tools to prepare an order or business inquiry. Displayed configurations and inquiry submissions do not by themselves complete a purchase.

Orders and payment

Product selection, stock, final price, shipping, taxes and applicable after-sales terms are confirmed in the quotation or external checkout before payment. No card details are collected by this HTML page.

Product suitability

Confirm the model, pipe interfaces, operating conditions and installation documents before purchase. Product images marked as illustrations do not establish exact dimensions or included fittings. Use a qualified installer and the current product manual.

Commercial cooperation

A partnership or OEM inquiry is a request for discussion. Pricing, minimum quantities, territory, customization, support and delivery require written confirmation. Submitting an inquiry does not grant distribution rights or exclusivity.

Questions

Contact official@aiwsh.com for clarification before ordering. The seller identity and transaction-specific terms should be shown in your final quotation or checkout.

Home / Shop / Wireless Leak Sensor
AIWSH wireless leak sensor

AIWSH / ACCESSORIES

Wireless Leak Sensor

$49

Add detection at another high-risk location. This accessory requires a compatible AIWSH valve; it is not an independent shut-off system.

  • Direct wireless communication with a compatible AIWSH valve.
  • Up to 8 paired wireless sensors per valve.
  • Check existing sensor count before adding more.
SENSOR DEAL
2 sensors 5% off3+ sensors 10% off
Ships from the U.S.Estimated delivery: 3–5 days
Free shipping on orders $300+Below $300, shipping is confirmed before payment.
30-day returnsBuyer pays return shipping.
Shipping & return details

Ask about compatibility
Home / Shop / Wired Leak Probe
AIWSH wired leak probe, coiled white cable and connector

AIWSH / ACCESSORIES

Wired Leak Probe

$9.90per probe · 6.6 ft

Direct wired detection for a compatible valve. Confirm connector type, cable length and valve model before ordering.

  • Plugs into the dedicated wired sensor port.
  • 6.6 ft cable for flexible sensor placement.
  • Send a connector photo if you are unsure.

Cable length: 6.6 ft

Ships from the U.S.Estimated delivery: 3–5 days
Free shipping on orders $300+Below $300, shipping is confirmed before payment.
30-day returnsBuyer pays return shipping.
Shipping & return details

Ask about compatibility
$199Complete kit · $199 / kit
View kit